Overview
IES7211-8PGE2GF-BOS, 8 Ports Booster PoE Switch,with 2 Gigabit SFP Uplink,DIN-Rail Mount, With Redundant Power Input
Physical Port
Power over Ethernet
Switching
Hardware
Lightning Protection
Mechanical Properties
|
Layer 2 Features
Security
Management
|
Features
Built-in Power Booster
The built-in power booster converts a DC input of 12V-24V to 48V, which is crucial for deploying standard PoE devices like IP cameras and wireless APs on vehicles like buses, trains, and ships where only lower DC voltages are available. This feature is ideal for public transportation systems and mobile applications.
PoE Power Delivery
The IES7511-8PGE2GF-BOS delivers up to 100W of PoE power, with each port capable of providing 15.4W. It efficiently powers devices such as IP cameras, PoE-enabled wireless routers, and other connected devices, helping to reduce the need for additional power cables, streamlining installation.
Wide Operating Temperature
Engineered to operate under extreme conditions, this 8 Port booster PoE switch works reliably within a temperature range of -25°C to 60°C. This makes it suitable for both indoor and outdoor use in environments like railways, traffic systems, and smart city applications, where temperature fluctuations are common.
IP40-rated Aluminum Alloy Enclosure
Housed in a robust aluminum alloy enclosure with an IP40 rating, the switch is protected against dust, debris, and vibration. This industrial-grade design ensures the switch remains functional even in harsh environments, such as sea and transportation systems.
Advanced Networking Features
It supports advanced Layer 2 networking features like VLAN for segmenting traffic, QoS for prioritizing critical data, and IGMP Snooping for multicast traffic management. These features are ideal for optimizing network performance in complex industrial and transportation networks.
Redundant Power Inputs
With dual power inputs, this 8 port booster PoE switch offers redundancy, ensuring uninterrupted operation even if one power source fails. This feature is critical for mission-critical applications, such as surveillance, where downtime can result in compromised security.
DIN Rail Mounting for Vibration Resistance
Designed with DIN rail mounting, the booster PoE switch resists damage from vibrations caused by vehicle movement. This feature makes it ideal for mobile or vehicular installations, ensuring the switch can handle continuous physical stress without compromising performance.
Connectivity Solutions
8 Port Booster PoE Switch for Bus
8 Port Booster PoE Switch for Rail Transit
Specification
Spécifications techniques :
IE7511-8GE2GF-BOSPorts cuivre RJ45 10M/100M/1G :
8Ports SFP (fibre) 1,25G :
2Ports PoE/PoE+ :
8Type d'alimentation :
DC 12V-24VPort de console (pour la configuration) :
YesBouton de réinitialisation :
YesAlimentation via Ethernet :
*Norme PoE :
IEEE 802.3at Power over Ethernet Plus/PSE; Backward compatible with IEEE 802.3af Power over EthernetType d'alimentation PoE :
End-span: 1/2 (+), 3/6 (-)Puissance de sortie PoE :
Per port 48V DC, 320mA. max. 15.4 watts (IEEE 802.3af); Per port 48V DC, 630mA. max. 30 watts (IEEE 802.3at)Spécification de performance :
*Mémoire tampon de paquets :
1.6 MbModes de transfert :
Store-and-forwardBande passante :
1GTaux de transfert de paquets :
14.88Mpps (64 byte packet size)Taille de la base de données d'adresses MAC :
8K (48-bit MAC ad-dresses)Prise en charge des trames géantes :
9KServices L2 - VLAN :
*Marquage VLAN IEEE 802.1Q :
YesMarquage QinQ VLAN :
YesVLAN basés sur IP :
YesVLAN basés sur MAC :
YesVLAN basé sur un protocole :
YesVLAN voix :
YesMappage VLAN :
YesServices L2 - Disponibilité :
*Contrôle des tempêtes :
Yes (Broadcast, multicast, unknown unicast)IEEE 802.3ad - LAG (LACP) :
YesIEEE 802.3x :
YesAnneau (ERPS, conforme à G.8032) :
Yes, Recovery time < 50msProtocole Spanning Tree IEEE 802.1D :
YesProtocole IEEE 802.1w Rapid Spanning Tree :
YesProtocole Spanning Tree multiple IEEE 802.1s :
YesRelais DHCP de couche 2 :
YesServices L2 - Filtrage multidiffusion :
YesSurveillance IGMP (v1, v2 et v3) :
YesPrise en charge de la surveillance MLD (v1 et v2) :
YesInterrogateur de surveillance IGMP (v2) :
YesInterrogateur de surveillance MLD (v1) :
YesEnregistrement VLAN multidiffusion (MVR) :
YesServices L3 - Routage :
*Routage statique IPv4 :
100Routage statique IPv6 :
100Agrégation de liens :
*Décalage manuel :
Yes# de GAL / # de membres dans chaque GAL :
8 LAGs with max 8 members in each LAGServices de surveillance et de découverte du réseau :
*802.1ab LLDP :
YesSNMP :
v1, v2c, v3Groupe RMON 1,2,3,9 :
YesSécurité Internet :
YesIEEE 802.1x :
YesComptabilité RAYON :
YesListes de contrôle d'accès (ACL) :
YesACL basées sur IP (IPv4 et IPv6) :
L2 / L3 / L4ACL basées sur MAC :
YesACL basées sur TCP/UDP :
YesContrôler MAC # entrées statiques :
48Sécurité basée sur les ports par adresses MAC verrouillées :
YesInspection ARP dynamique :
YesProtection contre les DoS :
YesPrévention des attaques DoS :
YesProtection contre les tempêtes de réseau, DoS :
YesQualité de service (QoS) :
*Limitation de débit basée sur le port :
Yes ingress and egressQoS basée sur le port :
YesPrise en charge des champs IPv6 :
YesQoS DiffServ :
Yes ingressCOS IEEE 802.1p :
YesDestination MAC et IP :
YesDSCP IPv4 et v6 :
YesBasé sur TCP/UDP :
YesRound Robin pondéré (WRR) :
YesTechnologie de file d'attente prioritaire stricte :
YesProtocoles réseau IEEE :
*Protocoles :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3af PoE • IEEE 802.3at PoE+ • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXProtocoles 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D Spanning Tree (STP) • IEEE 802.1s Multiple Spanning Tree (MSTP) • IEEE 802.1w Rapid Spanning TGestion, surveillance et dépannage :
*Gestion des mots de passe :
YesContrôle d'accès via RADIUS et TACACS+ :
YesGestion IPv6 :
YesSNMPv1/v2c/v3 :
YesMise en miroir des ports :
Yes ingress and egressMise en miroir de ports plusieurs vers un :
6Utilitaire de test de câble :
YesAccès Web TLS/HTTPS (version) :
Yes (v1.2)Transferts de fichiers (uploads, téléchargements) :
TFTP / HTTPTéléchargement/téléchargement HTTP (micrologiciel) :
YesJournal Sys (RFC 3164) :
YesLED :
YesPar port :
Speed, Link, Activity; PoE in different modePar appareil :
PowerSpécifications physiques :
*Dimensions (Largeur * Profondeur * Hauteur) :
150 x 130 x 48 mm (5.91 x 5.12 x 1.89 in)Poids :
0.9 kg (1.98 lb)Protection de coque :
P40 high-strength aluminum caseExigences d'alimentation :
DC 12~24V, redundant power with reverse polarity protectionConsommation d'énergie :
100W (when all ports used, line-rate traffic and max PoE)maximum d'énergie :
10W (worst case, all ports used, line-rate traffic) (Watts)Consommation d'énergie au repos :
7W (all ports link-down standby) (Watts)Ethernet économe en énergie (EEE) :
Yes (deactivated by default)Spécifications environnementales :
*Température de fonctionnement :
-40° to 85°C (-40° to 185°F)humidité d'exploitation :
95% maximum relative humidity (RH), non-condensingAltitude de fonctionnement :
10,000 ft (3,000 m) maximumTempérature de stockage :
-40° to 85°C (-40° to 185°F)Humidité de stockage (relative) :
95% maximum relative humidity, non-condensingAltitude de stockage :
10,000 ft (3,000 m) maximumNorme exécutive et protection :
*Protection contre la foudre :
*CEI61000-4-3 (RS) :
10V/m (80~1000MHz)FCC Partie 15/CISPR22 (EN55022) :
Class BCEI 61000-6-2 :
Common Industrial StandardIEC61000-4-9 (champ magnétique pulsé) :
1000A/mIEC61000-4-10 (oscillation amortie) :
30A/m, 1MHzIEC61000-4-12/18 (onde de choc) :
CM 2.5kV, DM 1kVCEI61000-4-4 (EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16 (transmission en mode commun) :
30V, 300V, 1sCEI61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (transmission radiofréquence) :
10V(150kHz~80MHz)CEI61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (surtension) : câble d'alimentation :
CM±4kV/ DM±2kV, Data cable: ±4kVPropriétés mécaniques :
*CEI60068-2-6 :
Anti VibrationCEI60068-2-32 :
Free FallCEI60068-2-27 :
Anti ShockÉmissions électromagnétiques et immunité :
*Certifications :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013Sécurité :
*Certifications de sécurité :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)Garantie et assistance :
*Garantie limitée sur le matériel :
Limited Lifetime*Assistance technique par téléphone et e-mail* :
Limited Lifetime*Assistance technique par chat en ligne 24h/24 et 7j/7 :
Limited Lifetime*Contenu du colis :
*Tous les modèles :
Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideType d'entreprise :
IndustrialPlus de filtres :
L2+ Managed
Questions & Answers
1. What is the total power budget of this switch?
The switch provides a total power budget of 100W, delivering up to 30W per PoE port.
2. Does the switch support Gigabit Ethernet speeds?
Yes, the switch supports 10/100/1000 Mbps speeds on all 8 ports.
3. What input power does this switch require?
It requires DC input between 12V and 24V, with a built-in booster to supply 48V for PoE devices.
4. Can it power high-demand PoE devices?
Yes, it supports IEEE 802.3af/at standards, delivering up to 30W per port for devices like IP cameras and wireless access points.
5. What advanced network features does this switch include?
It includes features like QoS for traffic prioritization, VLAN for network segmentation, and IGMP Snooping for multicast traffic optimization.
6. What kind of network redundancy features does it support?
It supports ERPS, STP, RSTP, and MSTP protocols for ensuring network reliability and preventing loops.
7. Is it suitable for harsh industrial environments?
Yes, with an IP40-rated enclosure and an operating temperature range of -40°C to 85°C, it is built for rugged conditions.
8. Does this switch support dual power inputs?
Yes, it has dual power inputs for added reliability and stability in case of power failure.
9. Is the switch easy to install in industrial applications?
Yes, it supports DIN-rail mounting, which ensures secure and convenient installation in vehicles and other industrial environments.
Downloads
Related Products