Overview
IES7511-16GE4GF-DC, 16 Port Gigabit Industrial Managed Ethernet Switch With 2 Gigabit SFP Uplink,DIN-Rail Mount, With Redundant Power Input
-
Physical Port
16 gigabit ethernet RJ45 ports for high-speed connectivity.4 mini-GBIC/SFP slots for flexible fiber connections.1 RJ45 console port for easy management access.1 reset button for quick factory reset and reboot.SwitchingBackplane bandwidth 48Gbps,Packet forwarding rate 29.76Mpps,MAC address 8kHardware-based 10/100/1000Mbps (half/full duplex) auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationHardwareIndustrial Case and InstallationIP40 High- strength Aluminum caseDIN-rail mount design12~54V DC, redundant power with reverse polarity protectionSupports 8KV DC Ethernet ESD protection-40 to 85 degrees C operating temperatureLED indicators for Power, LINK/ACT -
Lightning Protection
IEC61000-4-3 (RS):10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022):Class BIEC61000-6-2:Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :1000A/mIEC61000-4-10 (Damped oscillation) :30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :CM 2.5kV, DM 1kVIEC61000-4-4(EFT):Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :30V, 300V, 1sIEC61000-4-2 (ESD):±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :10V(150kHz~80MHz)IEC61000-4-8 (Power frequency magnetic field) :100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge) Power cable:CM±4kV/ DM±2kV, Data cable: ±4kVMechanical PropertiesIEC60068-2-6:Anti VibrationIEC60068-2-32:Free FallIEC60068-2-27:Anti ShockSecuritySupport IEEE 802.1xSupport RADIUS accountingSupport Access Control Lists (ACLs)Support MAC SecuritySupport IP Source Guard prevents IP spoofing attacksSupport DoS Attack PreventionSupport aaa authentication -
Layer 2 Features
Support IEEE 802.1Q VLANSupport MAC VLANSupport Surveillance VLANSupport Voice VLANSupports Spanning Tree ProtocolSupports Link Aggregation (LACP)Supports port mirrorSupports Multicast Filtering (IGMP)Supports DHCPSupports ERPSSupports RMONSupports MLD snoopingSupports MVRSupports Quality of Service (Qos)Supports Port Error DisableSupports Rate LimitSupports Storm ControlManagementIPv4 and IPv6 dual stack managementWeb switch managementConsole/Telnet Command Line InterfaceSNMP v1 and v2c switch managementSSHv2, TLSv1.2 and SNMP v3 secure accessFirmware upload/download via HTTP/TFTPConfiguration upload / download through Web interfaceHardware reset button for system reboot or reset to factory defaultSNTP Network Time ProtocolNetwork DiagnosticLink Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Features
Advanced Layer 2 and Layer 3 Management
The IES7511-16GE4GF-DC supports robust Layer 2 and Layer 3 management features, including VLAN, QoS, ACL, and routing protocols. These capabilities allow seamless network segmentation, improved traffic prioritization, and enhanced security. This ensures high-efficiency data handling, meeting the demands of complex industrial applications. With features such as IGMP snooping, static routing, and multicast control, users gain complete control over their network, ensuring smooth communication and reduced latency, especially in mission-critical environments like automation and surveillance.
16 Gigabit Ethernet Ports with 4 SFP Uplink Slots
Equipped with 16 Gigabit Ethernet ports and 4 Gigabit SFP uplinks, this switch provides versatile connectivity options for a wide range of devices. The high-speed uplink slots allow seamless connection to fiber-optic networks, ensuring extended communication distances and superior data transmission stability. This design supports businesses in creating scalable networks while maintaining consistent performance, making it perfect for data-intensive applications such as video surveillance, IoT devices, and enterprise-level operations.
ERPS Ring Network for Rapid Recovery
The IES7511-16GE4GF-DC supports Ethernet Ring Protection Switching (ERPS), enabling ultra-fast network recovery in under 50ms in case of link failure. This feature ensures continuous network operation, reducing downtime and preventing data loss. Ideal for industries requiring uninterrupted connectivity, such as transportation and energy, ERPS enhances network reliability and provides peace of mind for system operators managing mission-critical applications.
Wide Operating Temperature Range (-40℃ to 85℃)
Built to endure extreme conditions, the switch operates efficiently in temperatures ranging from -40℃ to 85℃. This ensures reliable performance in harsh industrial settings, including outdoor installations, manufacturing plants, and energy systems. The wide temperature tolerance makes it a robust solution for environments exposed to fluctuating climates or demanding workloads, ensuring consistent network uptime and reduced maintenance concerns.
Dual Power Input with Wide Voltage Range (DC 12–56V)
Designed for reliability, the IES7511-16GE4GF-DC features a dual power input system supporting DC 12–56V. This redundancy ensures continuous operation even if one power source fails, minimizing downtime. The wide voltage range makes it compatible with various industrial power systems, providing flexibility for deployment. This feature enhances network reliability and ensures seamless operation in critical environments like factories, transportation hubs, and utilities.
IP40-Rated Metal Enclosure with DIN-Rail Mounting
The rugged IP40-rated metal enclosure offers excellent protection against dust and physical damage. Combined with DIN-rail mounting, it simplifies installation in industrial control cabinets and other confined spaces. This design supports stable, long-term operation in tough conditions while promoting heat dissipation for better device performance. The robust construction aligns perfectly with industrial applications where durability and ease of installation are key priorities.
High ESD Protection (8kV)
With 8kV ESD protection, the IES7511-16GE4GF-DC is shielded against electrostatic discharge, safeguarding the device and connected equipment from electrical surges. This ensures reliable performance even in environments prone to electrical disturbances, such as factories with heavy machinery or outdoor setups exposed to lightning. The advanced protection reduces the risk of damage, lowers maintenance costs, and improves network stability, making it a dependable choice for industrial deployments.
Connectivity Solutions
16 Port Gigabit Industrial Managed Ethernet Switch with 4 Gigabit SFP Ring Network Connectivity Solution
16 Port Gigabit Industrial Managed Ethernet Switch with 4 Gigabit SFP Connectivity Solution
Specification
Spécifications techniques :
IE7511-16GE4GF-DCPorts cuivre RJ45 10M/100M/1G :
16Ports SFP (fibre) 1,25G :
4Port de console (pour la configuration) :
YesBouton de réinitialisation :
YesSpécification de performance :
*Mémoire tampon de paquets :
4.2 MbModes de transfert :
Store-and-forwardBande passante :
1GTaux de transfert de paquets :
29.76Mpps (64 byte packet size)Taille de la base de données d'adresses MAC :
8K (48-bit MAC ad-dresses)Prise en charge des trames géantes :
9KTemps moyen entre les pannes :
158,124 hours (MTBF)Services L2 - VLAN :
*Marquage VLAN IEEE 802.1Q :
YesMarquage QinQ VLAN :
YesVLAN basés sur IP :
YesVLAN basés sur MAC :
YesVLAN basé sur un protocole :
YesVLAN voix :
YesMappage VLAN :
YesServices L2 - Disponibilité :
*Contrôle des tempêtes :
Yes (Broadcast, multicast, unknown unicast)IEEE 802.3ad - LAG (LACP) :
YesIEEE 802.3x :
YesAnneau (ERPS, conforme à G.8032) :
Yes, Recovery time < 50msProtocole Spanning Tree IEEE 802.1D :
YesProtocole IEEE 802.1w Rapid Spanning Tree :
YesProtocole Spanning Tree multiple IEEE 802.1s :
YesRelais DHCP de couche 2 :
YesServices L2 - Filtrage multidiffusion :
YesSurveillance IGMP (v1, v2 et v3) :
YesPrise en charge de la surveillance MLD (v1 et v2) :
YesInterrogateur de surveillance IGMP (v2) :
YesInterrogateur de surveillance MLD (v1) :
YesEnregistrement VLAN multidiffusion (MVR) :
YesServices L3 - Routage :
*Routage statique IPv4 :
100Routage statique IPv6 :
100Agrégation de liens :
*Décalage manuel :
Yes# de GAL / # de membres dans chaque GAL :
8 LAGs with max 8 members in each LAGServices de surveillance et de découverte du réseau :
*802.1ab LLDP :
YesSNMP :
v1, v2c, v3Groupe RMON 1,2,3,9 :
YesSécurité Internet :
YesIEEE 802.1x :
YesComptabilité RAYON :
YesListes de contrôle d'accès (ACL) :
YesACL basées sur IP (IPv4 et IPv6) :
L2 / L3 / L4ACL basées sur MAC :
YesACL basées sur TCP/UDP :
YesContrôler MAC # entrées statiques :
48Sécurité basée sur les ports par adresses MAC verrouillées :
YesInspection ARP dynamique :
YesProtection contre les DoS :
YesPrévention des attaques DoS :
YesProtection contre les tempêtes de réseau, DoS :
YesQualité de service (QoS) :
*Limitation de débit basée sur le port :
Yes ingress and egressQoS basée sur le port :
YesPrise en charge des champs IPv6 :
YesQoS DiffServ :
Yes ingressCOS IEEE 802.1p :
YesDestination MAC et IP :
YesDSCP IPv4 et v6 :
YesBasé sur TCP/UDP :
YesRound Robin pondéré (WRR) :
YesTechnologie de file d'attente prioritaire stricte :
YesProtocoles réseau IEEE :
*Protocoles :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXProtocoles 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D (STP) • IEEE 802.1s (MSTP) • IEEE 802.1w (RSTP) • IEEE 802.1w (RSTP) • ITU-TG.8032 (ERPS)Gestion, surveillance et dépannage :
*Gestion des mots de passe :
YesContrôle d'accès via RADIUS et TACACS+ :
YesGestion IPv6 :
YesSNMPv1/v2c/v3 :
YesMise en miroir des ports :
Yes ingress and egressMise en miroir de ports plusieurs vers un :
18Utilitaire de test de câble :
YesAccès Web TLS/HTTPS (version) :
Yes (v1.2)Transferts de fichiers (uploads, téléchargements) :
TFTP / HTTPTéléchargement/téléchargement HTTP (micrologiciel) :
YesJournal Sys (RFC 3164) :
YesLED :
YesPar port :
Speed, Link, Activity; PoE in different modePar appareil :
PowerSpécifications physiques :
*Dimensions (Largeur * Profondeur * Hauteur) :
48 x 135 x 170 mm (1.89 x 5.31 x 6.69 in)Poids :
1.1 kg (1.98 lb)Protection de coque :
P40 high-strength aluminum caseExigences d'alimentation :
DC 12~54V, redundant power with reverse polarity protectionmaximum d'énergie :
18W (worst case, all ports used, line-rate traffic) (Watts)Consommation d'énergie au repos :
10W (all ports link-down standby) (Watts)Ethernet économe en énergie (EEE) :
Yes (deactivated by default)Ventilateur :
FanlessSpécifications environnementales :
*Température de fonctionnement :
-40° to 85°C (-40° to 185°F)humidité d'exploitation :
95% maximum relative humidity (RH), non-condensingAltitude de fonctionnement :
10,000 ft (3,000 m) maximumTempérature de stockage :
-40° to 85°C (-40° to 185°F)Humidité de stockage (relative) :
95% maximum relative humidity, non-condensingAltitude de stockage :
10,000 ft (3,000 m) maximumNorme exécutive et protection :
*Protection contre la foudre :
*CEI61000-4-3 (RS) :
10V/m (80~1000MHz)FCC Partie 15/CISPR22 (EN55022) :
Class BCEI 61000-6-2 :
Common Industrial StandardIEC61000-4-9 (champ magnétique pulsé) :
1000A/mIEC61000-4-10 (oscillation amortie) :
30A/m, 1MHzIEC61000-4-12/18 (onde de choc) :
CM 2.5kV, DM 1kVCEI61000-4-4 (EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16 (transmission en mode commun) :
30V, 300V, 1sCEI61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (transmission radiofréquence) :
10V(150kHz~80MHz)CEI61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (surtension) : câble d'alimentation :
CM±4kV/ DM±2kV, Data cable: ±4kVPropriétés mécaniques :
*CEI60068-2-6 :
Anti VibrationCEI60068-2-32 :
Free FallCEI60068-2-27 :
Anti ShockÉmissions électromagnétiques et immunité :
*Certifications :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013Sécurité :
*Certifications de sécurité :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)Garantie et assistance :
*Garantie limitée sur le matériel :
Limited Lifetime*Assistance technique par téléphone et e-mail* :
Limited Lifetime*Assistance technique par chat en ligne 24h/24 et 7j/7 :
Limited Lifetime*Contenu du colis :
*Tous les modèles :
Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideType d'entreprise :
IndustrialPlus de filtres :
L2+ Managed
Related Products
-
IES7511-10GE4GF-DC14 Ports Gigabit Managed Industrial Switch With 4 Gigabit SFP Uplink
-
IES7511-12GE4GF-DC12 Port Gigabit Managed Industrial Ethernet Switch With 4 Gigabit SFP Uplink
-
IES7511-16GE12GF-DC16 Port Gigabit RJ45 And 12 Port Gigabit SFP Industrial Managed Ethernet Switch
-
IES7511-24GE2GF-DC24 Port Gigabit Managed Industrial Ethernet Switch With 2 Gigabit SFP Uplink